| Customization: | Available |
|---|---|
| Warranty: | 1 Year for 3 Key Parts(Axles, Gearbox, Engine) |
| Type: | Tanker |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
4X2 Diesel Fuel 2500 Liters Foam Water Pump, Water Canon Fire Fighting, Fire Truck
*
-----------------------------------------------------------------
*100% new condition by manufacturer direct sale*
*100% quality guaranteed*
» I. QUICK DETAILS
» II.SPECIFICATION
| 4X2 Diesel Fuel 2500 Liters Foam Water Pump, Water Canon Fire fighting, Fire Truck | |||||
| Dimensions | Length/mm | 6695 | |||
| Width/mm | 2285 | ||||
| Height/mm | 2350 | ||||
| Wheelbase/mm | 3800 | ||||
| Front/Rear Thread/mm | 1835/1640 | ||||
| Approach/Departure Angle/° | 20/13 | ||||
| Front/Rear Overhang/mm | 1180/1715 | ||||
| Chassis | Brand | Dongfeng | |||
| Driven Mode | 4x4, LHD | ||||
| Front Axle Load/kg | 2200 | ||||
| Rear Axle Load/kg | 4500 | ||||
| Braking System | Air Break | ||||
| Tyre | 7.5R16, 6 pcs and one spare | ||||
| Gear Box | 5 forwards 1 backward | ||||
| Max Speed/ km/h | 85 | ||||
| Beam | 140mm Cross Beam | ||||
| Cab | 3+3 passengers | ||||
| Engine | Model | Cummins, Euro IV | |||
| Horsepower/HP | 140 | ||||
| Displacement/L | 3.9 | ||||
| Max Torque | 450N·m | ||||
| Speed at Max Torque/rpm | 1500 | ||||
| Fire Fighting System | |||||
| Fire Pump | Model | CB10/40 | |||
| Flow/ L/s | 40 | ||||
| Pressure/MPa | 1 | ||||
| Water Suction Time/s | Less than 35(when height is 7m) | ||||
| Installation Mode | Rear-mounted | ||||
| Fire Monitor | Model | PS40 | |||
| Pressure/MPa | 1 | ||||
| Flow/ L/s | 40 | ||||
| Range/m | More than 60 | ||||
| Horizontal Rotating Angle/° | 360 | ||||
| Pitching Rotating Angle/° | -30~80 | ||||
| Operation Mode | Manual | ||||
| Pipeline Systems | Internal Inflow Pipe | One pc φ125mm pipe with one pc φ125mm flygate | |||
| External Inflow Pipe | Installed behind the pump, φ125mm, with 4 pcs 2m water suction pipes | ||||
| Water Outlet Pipe | -Installed behind the pump, 2 pcsφ80mm constant pressure ball valves and 2 pcs φ65mm medium pressure ball valves | ||||
| -One pc φ80mm gun pipe with φ80mm flexible joints, controlled by a φ80mm ball valve | |||||
| Water Injection Pipe | -One pc φ50mm internal water injection pipe | ||||
| -One pc φ65mm external water injection pipe | |||||
| Cooling Water Pipe | Equipped with stainless steel ball valve | ||||
| Drain Pipe | In the lowest position of the pipe | ||||
| Water Tank | Loading Capacity/kg | 2500 liters | |||
| Material | Quality Carbon Steel Plate | ||||
| Thickness | Baseboard and Endplate: 4mm | ||||
| Side plate and top plate: 3mm | |||||
| Structure | Welded Type, Anti-swing Plate Inside | ||||
| -One Manhole, with fast lock & unlock device | |||||
| -One Overflow Device | |||||
| -One Level Indication Device | |||||
| -One Drain Hole, controlled by manual valve | |||||
| Electrical System | -Above the driving room are lightbar & 12V/60W fire scene light | ||||
| -Above both sides of the vehicle are two flash lights | |||||
| -100W alarm light | |||||
| -Switches of all the lights, alarms and pumps on the control panel. | |||||
| Foam Tank | Structure | Connected | |||
| Capacity/kg | 500 | ||||
| Material | Quality | ||||
| Base: Side Plate: Anti-swing Plate | 4:4:3 | ||||
| -One Manhole, with fast lock & unlock and | |||||
| Other Detail | pressure-release device | ||||
| -One Overflow Device: DN50mm | |||||
| -One Drain Hole with ball valve: DN40 | |||||
| Powder Cylinder | Power System | Including Pressed Nitrogen and Burned Gas | |||
| Capacity/kg | 2000 | ||||
» III.DETAILED VIEW OF FIRE FIGHTING TRUCK
» IV. WORKSHOP AND TESTING FOR FIRE TRUCK
» V. SHIPPING AND PACKING (RORO AND BULK SHIP)
RORO: The truck is driven to the ship inside directly and fixed well. It can protect the truck being rusty and broken during shipping.
BULK: The truck is lifted by crane then put on the vessel deck. This model is much cheaper.
CONTAINER: The truck is put into the container. This model is used for small model trucks
The truck is driven to the ship inside directly and fixed well. It can protect the truck being rusty and broken during shipping.
HUBEI MANTEN AUTOMOBILE CO.,LTD is an authorized special truck manufacturer which has many years in design ,product ,sales and service in special trucks like as boom truck , fire truck, manlift truck, tank truck , garbage truck, tipper truck , wrecker truck , refrigerated truck and etc. Main info as below:
(1) More than 500 workers, large and advanced production;
(2) 25 professional engineers, can offer the best and cheapest design;
(3) Build strict QC team to guarantee the quality;
(4) 1 year or 30,000km warranty which comes first.
(5) One set of spare parts of chassis provided which will help you save money on maintenance.
(6) Provide technical support and after serive for life.
(7) Professional sales team which will help you to choose suitable truck.
Why choose us?
Experience
10 years experience of production,sales,research and development in the field of special trucks.
Specialization
We can produce according to your demand, the material,the size, the color and the logo is optional for you.
Good quality
Has solid technology, advanced equipments;Reliant quality and flexible modes of operation also have strict quality control system and passed the iso9001-2008 and the 3c (china compulsory certification),with sgs,bv certifcate as well.
Chassis supply
We have a very good long term cooperation relationship with chassis manufacturer,such as dongfeng,foton,sinotruck,shacman,i-veco,faw,hino,camc,north-benz,ect.
Production supply capacity
Company scale
More than 3000 employees with 1000 acres factory, total asset 2 billion.
We manufacture the truck as soon as possible once your order confirmed.And for the stock, we can delivery it immediately.
){kind=link}