HUBEI MANTEN AUTOMOBILE CO.,LTD
Bitumen spray truck which is alsp called asphalt sprayer or asphalt paving truck, is specially designed and produced for transporting or spraying liquid asphalt(Including hot asphalt, emulsified asphalt and residue),in addition it can also supply loose asphalt binder to the soil, the construction of asphalt stabilized soil pavement or pavement base. Bitumen spray truck is a black road construction machinery, one of the main equipment for the construction of road, city roads, airports and port terminals.
Asphalt spreader refers to a tank-type special operation vehicle equipped with thermal insulation container, asphalt pump, heater and spraying system for spraying asphalt; it can also be defined as a kind of liquid asphalt spraying hot asphalt, emulsified asphalt, residual oil, etc. It can be widely used in road construction, urban roads, airports, port terminals and reservoirs; large-capacity asphalt distributors can also be used as asphalt carriers, mainly used for asphalt penetration method surface treatment, penetration , sticky layer, in-situ mixing of mixtures, asphalt stabilized soil and other construction and maintenance projects
Type of our asphalt paving truck:
a. Common type
b. Standard type
c. Smart type(domestic main components)
d. Smart type(import main components)
Capacity of spraying asphalt:
Type: whole four types above can work with liquid asphalt, such as hot asphalt, emulsified asphalt and residue, etc.
Rubber asphalt: need special equipment and customized.
Spraying rate: according to equipped asphalt pump(from 300~680 liters/min)
Spraying width: 4.5~6m
Spraying area: 0.2~0.3 liters/cbm
Features:
1. Each of the spraying nozzles can be controlled individually. The spraying width can be adjusted freely and with a sharp start and stop.
2. The spray nozzle controlled via the pneumatic cylinder from the driving cab, safe and easy.
3. The asphalt pump adopted with proportional control of high precision to realize the accurate control of spraying rate.
4. The design of fan-shaped spraying nozzles can help to realize perfect spraying effect and good uniformity.
5. Asphalt pump is heated by engine cooling water. Low speed motor driven is energy saving and easy for starting up.
6. The pipe line sclean system introduces diesel oil to circulate and high-pressure air purging solution.
7. Simple operation for control system, it is easy to maintain and repair.
8. Equipped with Italy burner to heat up asphalt.
I. Details photos /Specification of Automatic Smart Type 6CBM asphalt paver Distributor Bitumen
| The parameters of whole truck |
| Chassis Model /Manufacturer |
EQ1126/Dongfeng |
| Overall dimension (L*W*H) |
8990mm*2370mm*3000mm |
| Gross weight(kgs) |
15995kgs |
| Kerb weight (kgs) |
8455kgs |
| Loading weight (kgs) |
10 000kgs |
| Wheelbase(mm) |
4700mm |
| Engine |
Model |
B170-33 |
| Rated Power |
125KW/170HP |
| Displacement |
5900ml |
| Max. torque /rotate speed |
560N.m/1300RPM |
| Type |
6 cylinder ,in-line, inter-cooling |
| Fuel type |
Diesel oil |
| Emission standard |
Euro3 |
| Steering |
Left/Right hand drive |
| Gearbox |
6 forwarder & 1 reverse |
| Loading of Front/rear axles |
3600kgs/9000kgs |
| Cabin |
one and half row ,proof cabin |
| Tyre |
9.00-20 nylon tires ,6+1 pcs |
| The parameters of special equipment |
| Volume of tank |
10 000Liter |
Spreading width |
6000mm |
| spreading volume |
0.3-3 L/m3 |
No.of spray nozzle |
38 pcs |
| Bituman pump |
YC500, 500 L/min |
| Hydraulic system |
Deke brand ,DK120 |
| Air-cooled device |
China brand ,AH1470 |
| Control system |
Manual operation |
| Rear row pipe |
6 meter with 38 pcs nozzles |
| Generator |
5.0W gasoline generator |
| Burner |
Japan brand,OM-2N ,could reach 200 degree |
| Heat conduction oil |
RY32-32-160,6.5m³/h |
| PTO |
with |
| Reducer |
JS-4-36 |
| Growing cylinder |
SC100×250 |
II.Main parts of Butimen spray truck
III. Main type of Butimen spray truck
IV.PRODUCT SHIPPING (RORO OR BULK SHIP OR CONTAINER)
RORO: The truck is driven to the ship inside directly and fixed well. It can protect the truck being rusty and broken during shipping.
BULK: The truck is lifted by crane then put on the vessel deck. This model is much cheaper.
CONTAINER: The truck is put into the container. This model is used for small model trucks
V. ABOUT US
HUBEI MANTEN AUTOMOBILE CO.,LTD is an authorized special truck manufacturer which has many years in design ,product ,
sales and service in special trucks like as boom truck , fire truck, manlift truck, tank truck , garbage truck, tipper truck , wrecker truck , refrigerated truck and etc. Main info as below:
(1) More than 500 workers, large and advanced production;
(2) 25 professional engineers, can offer the best and cheapest design;
(3) Build strict QC team to guarantee the quality;
(4) 1 year or 30,000km warranty which comes first.
(5) One set of spare parts of chassis provided which will help you save money on maintenance.
(6) Provide technical support and after serive for life.
(7) Professional sales team which will help you to choose suitable truck.
V. FAQ
After Sales Service
Answer and solve your questions and consult within 24 hours
Overseas job site service available
One year guarantee about three key parts(axle, engine, transmission).Other spare parts could be supplied by cost price.
Other services:
1.All trucks and trailers are new and be customized to meet all your requirement.
2. All trucks and trailers are with 12 months quality guarantee.
3. CKD and SKD are available.
4. Technical support are provided.
Payment terms
1.Our price term: FOB Shanghai as common, other port is also acceptable.
2. Our Payment term: T/T, 30% deposit after order confirmation, 70% balance should be paid before delivery.
3. Delivery time: the delivery time is 20-30 days as common, the exact delivery time depends on the order and the current production condition.
If you are interested in our trucks, pls contact me, I will send our best quotation to you.
Welcome to contact us for the operation of the Bitumen Sprayer truck !
Sales manager: Ms Lotus
Audited Supplier 
){kind=link}