| Customization: | Available |
|---|---|
| After-sales Service: | 24 Hours on Line |
| Warranty: | 12months After Delivery |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 4500mm wheelbase, Cummins 180 HP six cylinder engine, 8-speed gearbox, 10.00R20 steel tire, 5T front axle, 10t rear axle, air brake, ABS, direction assistance, clutch assistance, original air conditioner. |
| Cleaning part of the cleaning suction truck: the cleaning tank is made of 4mm WISCO carbon steel, with a volume of about 2m3, with visual water pipe, installed with Tianjin Tongjie high-pressure cleaning pump, pressure 21MPa, flow 135L / min, with 60m inner diameter 19mm cleaning steel wire hose, standard equipped with ten alloy nozzles with different diameters, pipe rolling force of 1800n, pipe rolling speed of 0-25m / min, and propulsion force of more than 180n, It can connect water pipes and sewer pipes with a diameter of 10-80cm. Cleaning the sewage suction part of the sewage suction truck: the sewage suction tank is made of 6mm WISCO carbon steel, with a volume of about 4 square meters, with a sewage viewing window, a hand washing device, an anti overflow valve, Sk-6 water ring vacuum pump (optional oil pump), an 8m 4-inch sewage suction steel wire rubber pipe, a 100mm sewage ball valve is equipped at the end of the tank, the tank body is equipped with a liquid pressure lifting system, the back cover is opened and closed hydraulically, and has a self unloading function, which can be pressurized and forced drainage. The tank body is equipped with a spacer plate to prevent the deformation of the dirt absorption tank body. Optional parts of cleaning and sewage suction truck: Interworking of clean water tank and sewage suction tank, anti overflow alarm device, solid-liquid separator, anti-corrosion in tank and watering function. |
| Specification sewage suction truck | ||
| Drive model | 4*2,RHD | |
| Max. Driving Speed(km/h) | 100 | |
| Cabin | Passengers Allowed in front row | 3 persons |
Vehicle |
Curb Weight(kg) | 9250 |
| Overall Dimensions(L x W x H)(mm) | 8140*2500*3280 | |
| Approach/Departure angle(°) | 19/16 | |
| Wheel Base(mm) | 4700 | |
| Overhang (front/rear) (mm) | 1430/1410 | |
| Wheel Track (front/rear) (mm) | 1960/1860 | |
| Axle charge(front/rear)(ton) | 3.6/10.5 | |
| Leaf Spring | 9/12+9H | |
| Tire | 9.00R20, 6+1spare tire | |
Engine |
Model | YC4E160-33 |
| MAX Power(HP) | 160 | |
| Displacement | 4.257L | |
| Maximum output power | 118kW | |
| Intake form | Turbocharged | |
| Fuel | Diesel | |
| Cylinder Number | 4 | |
| Cylinder arrangement | Inline | |
| Engine size | 380kg | |
| Rated Speed(RPM) | 2600 | |
| MAX Torque(N.M) | 600N.m | |
| MAX Torque Speed(RPM) | 1200-1600 | |
| Minimum fuel consumption at full load | 200g/kW.h | |
| Cylinder x stroke | 110*112mm | |
| Emission standard | Euro 3 | |
Gearbox |
Model | DC6J65TC |
| Gear | 6 forwards & 1 reverse |
Sewage Suction System |
||
Sewage Tanker |
Capacity | 10 cubic meters |
| Material | Q235 high tension steel, 5mm Tank body and 6mm End Plate |
|
Dumping System |
Middle Tipper | Hydraulic Controlled Middle lifting. |
| Rear Door | Hydraulic Controlled Rear Door | |
| Pump | High Efficiency Vacuum Suction Pump 10ton,XD-360 | |
| Pump System | 100mmΦ suction pipe, suction time ≤5min, effective suction range≥8,max vacuum degree ≤15 Kpa, dump angle ≥45 | |
| Vacuum Pressure | -0.09Mpa | |
| Sewage Pipe | 7 meters Rubber Pipe(one unit pipe) | |
| Other Parts | Water-gas separator, Oil-gas separator, Four way valve, Safety valve, Anti overflow valve, Anti overflow warning device | |
We can offer 4x2, 6x4, 8x4, Dongfeng, Sinotruck, FOTON, SHACAN, FAW, CAMC, ISUZU, JMC, JAC with 3m3 to 20m3 water tank trucks.
III. Details and operation of Dongfeng 180hp 12m3 water cleaning sewage truck 12cbm sewage suction tank truck with water tank
| Applicable occasions and working principle of cleaning and suction vehicle: The cleaning and sewage suction vehicle integrates the functions of flushing, dredging, sewage suction and reverse discharge. The sewage suction part is used for the suction, transportation and discharge of various liquid and semi liquid (such as sludge in septic tank, sewer, rainwater well, inspection well, sedimentation well and about 10mm stones), as well as sludge, feces, wastewater and other media under various ditches, It can also be used for emergency treatment of sudden environmental pollution accidents. It can also be used for the sewage absorption of septic tanks and sewers in communities, projects, schools, farms and other places, or for the cleaning and transportation of site mud, the transportation of crude oil in refineries and so on. The high-pressure cleaning part of the cleaning suction truck is mainly used to dredge the sewer, sewage pipeline and dead corner mud ditch. It can also be used to clean the industrial drainage pipeline and wall, and clean the road and square ground. Its working principle is that the water sprayed by the high-pressure nozzle (super pressure and high flow) forms a reaction force in the sewer, Push the high-pressure nozzle forward to break, Jack and clean the blockage in the pipeline, so as to achieve the role of dredging. The design structure of the whole vehicle is reasonable, the performance is excellent, and the operation is flexible and simple. |
IV. Production workshop
There are more than 500 workers in our factory. Every production details are strictly controlled by our technicial engineers and production manager.
HUBEI MANTEN AUTOMOBILE CO.,LTD is an authorized special truck manufacturer which has many years in design ,product ,sales
and service in special trucks like as boom truck , fire truck, manlift truck, tank truck , garbage truck, tipper truck , wrecker truck ,
refrigerated truck and etc. Main info as below:
Welcome to contact with us for more info. We will offer you the best truck as we can .
Sales manager : Ms Scarlett
){kind=link}